Signs of a Blown Head Gasket
Detect Signs of a Blown Head Gasket Earlier To Avoid Major Car Disaster

A head gasket failure can lead to a wide variety of car problems and identifying the signs of failure can help you to prevent any major car disaster. Overheating problems are often encountered due to a variety of reasons and the main reason is problems with the gaskets. Any leak or crack in the gasket can result in the boiling up of the cooling system and this can result in radiator failure. If you don’t attend to the gasket problem in time, it may even result in an explosion of the tank due to mixing up of water and oil. To avoid a failure of the engines, you should learn to understand gasket problems and failure symptoms

The best preventive maintenance is to ensure that the head gasket is holding good and this can be done by testing the compression in the cylinder. There are also quite a few things that can be observed to make sure that there is no problem with your car head gasket. If you suspect that gasket has minor leaks or cracks, you should approach your car mechanic and get the internal parts checked and reviewed.

When your engine is cold, open your car bonnet and check the coolant level and color. Depending on the type of coolant you use, it can be either blue or green and when you add antifreeze, it should be the color of the antifreeze. The coolant solution should be clear and clean. If it appears muddy, then there is surely some problem with your gasket. The radiator can also provide an indication about the problems with the head gasket. A soapy, thick and creamy deposit will definitely indicate oil and water contamination and this is a direct indication of head gasket failure.

You can remove the oil dipstick and inspect it on your own with naked eyes. The oil attached to the dipstick should be black or clear. A creamy texture and color indicates that water and oil has combined. You can also run the engine for a few minutes and let the coolant system and cooling fan to do its work for some time to find out more about the gasket problem. After switching off the engine, you can once again check the coolant level, radiator and expansion tank to find out the signs of mixing of oil and water.

Many car owners who find that their temperature gauge is giving abnormal readings don’t really understand that head gasket problem is the cause. Certain types of leaks and cracks can be repaired with your gasket, but sometimes, replacement is the only way. While head gasket repair cost is on the higher side, you should not do the job on your own in an attempt to save some money. Only a good mechanic with lots of experience in handing gaskets can deal with the problem. The mechanic will use cylinder head bolts and gasket kits to repair the gasket. Excessive temperature due to failure of gasket might have caused some warps in the cylinder and hence, it must be tested properly for pressure testing and skimming.

More information can be found on Head Gasket Pro. Another source about blown headgasket signs can be found here: blown head gasket symptoms.